AUTO-START-STOP -
AUTOMATIC TRANSMISSION
WARNINGS
Always switch the ignition off and
fully apply the parking brake before
carrying out any maintenance or
leaving your vehicle. Failure to follow this
instruction could result in personal injury
or death if the engine restarts.
For vehicles with Auto-Start-Stop
the battery requirement is different.
You must replace the battery with
one of exactly the same specification.
When stationary, the system stops the
engine to reduce fuel consumption and
CO2 emissions, and restarts the engine
when you are ready to move off.
Note:
The auto-start-stop indicator
illuminates green when the engine shuts
down. See
(page 70). It flashes amber with a message
when the driver needs to take action. See
illuminates grey the system is not available.
Using Auto-Start-Stop
WARNING
Apply the parking brake and shift into
park (P) before leaving your vehicle.
To Stop the Engine
1.
Release the accelerator pedal.
2. Stop your vehicle in drive (D).
3. Maintain pressure on the brake pedal.
Note:
The engine also shuts down if the
gearshift lever is in park (P) or neutral (N)
regardless of brake pedal position.
To Restart the Engine
Release the brake pedal, press the
accelerator pedal or put the gearshift lever
into drive (D), reverse (R) or sport (S).
Limitations of Use
Under certain conditions the engine may
not stop, for example:
•
When the driver seatbelt is unfastened.
•
Low engine temperature.
•
To maintain the interior climate.
•
The vehicle battery charge is low.
•
The outside temperature is too low or
too high.
•
Opening the driver door when moving.
•
The heated windshield is on.
•
When the transmission is in sport (S)
or reverse (R).
•
If the wheels are at an angle.
Under certain conditions the engine may
restart, for example:
•
To maintain the interior climate, for
example air conditioning.
•
The heated windshield is on.
•
Your vehicle starts to roll downhill in
neutral.
•
When the driver seatbelt is unfastened.
•
If the driver door is opened.
Switching the System On and Off
The system automatically turns on each
time you switch the ignition on.
To switch the system off, press
the switch and the word OFF
illuminates. Press again to
switch the system back on.
Note:
If the system detects a malfunction,
it turns off. If it remains inactive after an
ignition cycle, have your vehicle checked by
an authorized dealer.
122
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Unique Driving Characteristics
Содержание ENDURA 2017
