Ford ENDURA 2017, Руководство пользователя

Страница: 143 / 364

• Diesel vehicles only: Press and hold the
+ toggle (if equipped) or + steering
wheel paddle (if equipped) for 3
seconds.
The instrument cluster displays your
current gear. If a gear is requested but not
available due to vehicle conditions (too
low or too high engine speed), the current
gear flashes three times.
Note: At full accelerator pedal travel, the
transmission may automatically downshift
for maximum performance.
Emergency Park Position Release
Lever
WARNINGS
When doing this procedure, you need
to take the transmission out of park
(P) which means your vehicle can
roll freely. To avoid unwanted vehicle
movement, always fully apply the parking
brake prior to doing this procedure. Use
wheels chocks if appropriate.
If the parking brake is fully released,
but the brake warning lamp remains
illuminated, the brakes may not be
working properly. Have your vehicle
checked as soon as possible.
Do not drive your vehicle until you
verify that the stoplamps are
working.
Note: For some markets this feature will be
disabled.
Your vehicle is equipped with a brake-shift
interlock feature that prevents moving the
gearshift lever from park (P) when the
ignition is on and the brake pedal is not
pressed.
If you cannot move the gearshift lever out
of park (P) position with the ignition in the
on position and the brake pedal pressed,
a malfunction may have occurred. It is
possible that a fuse has blown or your
vehicle’s brake lamps are not operating
properly. See
Fuse Specification Chart
(page 212).
If the fuse is not blown and the brake
lamps are working properly, the following
procedure will allow you to move the
gearshift lever from park (P):
E155984
1. Remove the side panel on the right side
of the gearshift lever.
E155985
2. Locate the access hole.
140
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Transmission