Ford ENDURA 2017, Руководство пользователя

Страница: 213 / 364

WARNINGS
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
To Start the Engine
1. Start the engine of the booster vehicle
and rev the engine moderately, or press
the accelerator gently to keep your
engine speed between 2000 and 3000
RPM, as shown in your tachometer.
2. Start the engine of the disabled vehicle.
3. Once the disabled vehicle has been
started, run both vehicle engines for an
additional three minutes before
disconnecting the jumper cables.
Remove the jumper cables in the reverse
order that they were connected.
Note: Do not switch the headlamps on
when disconnecting the cables. The peak
voltage could blow the bulbs.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicator
lamps in the event of a serious impact that
deploys an airbag (front, side, side curtain
or Safety Canopy) or the seatbelt
pretensioners.
The lamps turn off when:
•
You press the hazard control button.
• You press the panic button (if
equipped) on the remote entry
transmitter.
• Your vehicle runs out of power.
TRANSPORTING THE VEHICLE
E143886
If you need to have your vehicle towed,
contact a professional towing service or,
if you are a member of a roadside
assistance program, your roadside
assistance service provider.
We recommend the use of a wheel lift and
dollies or flatbed equipment to tow your
vehicle. Do not tow with a slingbelt. Ford
Motor Company has not approved a
slingbelt towing procedure. Vehicle
damage may occur if towed incorrectly, or
by any other means.
Ford Motor Company produces a towing
manual for all authorized tow truck
operators. Have your tow truck operator
refer to this manual for proper hook-up
and towing procedures for your vehicle.
210
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Roadside Emergencies