SSC3100 Operation & Calibration Manual
Applying Material
5
To spread granular and prewet material:
STEP 1:
Press the gray LIQUID knob to activate the prewet application. This will
illuminate the selected prewet application percentage next to the LIQUID dial.
STEP 2:
Twist the SPREADER knob to adjust your granular output percentage.
STEP 3:
Twist the SPINNER knob to adjust your spinner set rate.
STEP 4:
Twist the LIQUID knob to adjust the prewet output percentage.
STEP 5:
Press the SPREADER knob to remove the spreader control from standby.
Granular and prewet material will spread depending on the state of the ground
speed interrupt calibration setting and if the vehicle is detecting ground speed.
STEP 6:
Press the SPREADER knob to place the spreader control back in standby and
stop the outputs.
To spread direct liquid material:
STEP 1:
Turn the SPREADER and SPINNER dials to 0.
STEP 2:
Press the gray LIQUID knob to activate the liquid application. This will illuminate
the selected liquid application percentage next to the LIQUID dial.
STEP 3:
Twist the LIQUID knob to adjust the direct output percentage.
STEP 4:
Press the SPREADER knob to remove the spreader control from standby. The
liquid material will spread depending on the state of the ground speed interrupt
calibration setting and if the vehicle is detecting ground speed.
STEP 5:
Press the SPREADER knob to place the spreader control back in standby and
stop the outputs.
To reduce the risk of death or injury, ensure
that all personnel are clear from moving
machinery before activating outputs.
This application mode is only applicable when
the liquid mode is set to one of the three prewet
related modes in calibration.
This application mode is only applicable when
the liquid mode is set to one of the two direct
liquid related modes in calibration.
Содержание SSC3100
