Force America SSC3100, Руководство по эксплуатации и калибровке

Страница: 13 / 24

SSC3100 Operation & Calibration Manual
Calibration
9
Calibration
The Calibration feature is used to setup your FORCE America SS3100 for your system and
application requirements. When the calibration feature is active the blast indicator on the front of
the unit will be illuminated green
.
To activate the Calibration Feature:
1. Set the SPREADER and SPINNER set rates to 0.
2. While the system is in Standby, press and hold the liquid button for three seconds.
3. Once the system activates the calibration feature indicated by the blast indicator on the
front panel turning green, release the liquid button.
To exit the Calibration Feature:
1. Press and hold the liquid button for three seconds.
When the calibration feature is active, the buttons have the following functions:
Input Input Function
Green
SPREADER
Knob
Twist Left Adjust the value for the active calibration setting.
Twist Right Adjust the value for the active calibration setting.
Pushbutton
Place the system in standby.
Remove the system from standby.
Blue
SPINNER
Knob
Twist Left
Decreases the value for the active calibration setting when
setting the min or max duty cycle.
Twist Right
Increases the value for the active calibration setting when setting
the min or max duty cycle.
Pushbutton None.
Gray
LIQUID
Knob
Twist Left Select the previous calibration setting for adjustment.
Twist Right Select the next calibration setting for adjustment
Pushbutton
Exits the calibration menu when held for 3 seconds when the
system is in standby.
The particular calibration setting being modified along with its current value will be indicated through
the various illuminated LEDs on the panel which is explained in the following section, Description
of Calibration Values.