EN
120
Preparing the shredder
Install the wheels
6
and feet
10
to the rack
9
as shown.
Attach the wheel covers
11
to
the wheels
6
.
Install the machine to the rack
9
as shown, by use of four
screws and washers.
1
2
Attention!
Make sure the ap-
pliance is switched off and
unplugged.
1
Plunger
2
Controls
3
Main Handle
4
Power connector
5
Lock lever
6
Wheel
7
Intake opening
8
Collection box
4.
Fill the shredding material into the
intake opening
7
. Do not overload
the machine.
5.
Make sure the shredded material
can fall freely into the collection
box
8
.
6.
Use the plunger
1
to push smaller
material down to the blades.
7.
Regularly clean the collection box
from shredded material.
Warning!
Only use the plung-
er in order to push shredding
material into the machine.
Attention!
Before starting to
use the machine, check the
protective devices and fastening
elements for damage.
Do not use the machine if it is
damaged.
1.
Inspect the material to be shred-
ded before starting. Remove any
objects that are not suitable for
shredding or could entangle the
blades [metal parts, stones, bot-
tles, cans, etc].
2.
Place the machine on a firm level
ground and do not move it during
operation.
3.
Use the ON switch
14
to switch
on the machine, and wait until the
motor has reached full speed.
9
Rack
10
Foot
11
Wheel cover
12
Safety interlock knob
13
Overload switch
14
ON Switch
15
OFF Switch
Product overview
Using the machine
