EN
117
of electric shock. The cut
ting gear can cause damage
to the cable thus leading to
contact with live parts.
i) Always stand clear of the
discharge zone when oper
ating the machine.
j) If the machine becomes
clogged, switch off and al
low the cutter to stop. Re
move the plug from the
mains supply before clear
ing debris.
k) When feeding material into
the machine be extremely
careful that pieces of metal,
rocks, bottles, cans or other
foreign objects are not in
cluded.
l) Do not tilt the machine while
it is running.
m) Never transport, pick up or
carry the machine while the
motor is running.
n) Switch off, allow the cut
ter to stop and remove the
plug from the mains sup
ply whenever you leave the
work area.
o) Do not allow processed ma
terial to build up in the dis
charge zone; this may pre
vent proper discharge and
can result in kickback of
material through the intake
opening.
p) Do not force the appliance.
It is working safer and bet
ter at the intended workload
range.
q) Do not run over, crush or pull
the extension cable, other
wise it may be damaged.
Protect the cable from heat,
oil, heavy load and sharp
edges.
r) Do not use the machine in
the rain or during danger of
lightning.
s) Empty the collection box
frequently. Do not wait until
the collection box is com
pletely full as this can cause
blockage at the extraction
chute.
t) Never operate the machine
with defective protective
devices or shields or with
out safety devices, for ex
ample without a collecting
bag attached.
u) Keep the socket on the con
necting cable clean in order
to avoid damage to the ca
ble or fire hazard.
v) Stop the machine and un
plug the plug from the sock
et. Make sure that all mov
ing parts have stopped:
– Whenever you leave the
machine unattended,
– Before removing jams or
cleaning clogged channels,
– Before checking, cleaning
or performing other work
on the machine.
w) Switch off the machine be
fore attaching or removing
the collecting bag.
