144
16-3. Overwrite Protection
(1) Press EVENT in the MEMORY block.
(2) Press the number button where the needed data is stored. The button will start flashing when
pressed. The [EVENT RECALL] menu will be automatically displayed.
(3) Press the page down button to go to PAGE 3.
(4) Turn F2 to change
OVER WR
to DISBL(disable) to set the write protection on the memory
button.
EVENT :CG WIPE:OVER WR:DELETE : : 3/3
RECALL : =OFF : =
DISBL
: >OFF : :P.01
16-4. Deleting Events
To Delete Data for an Event:
(1) Press EVENT in the MEMORY block.
(2) Press the number button from which data is to be deleted. The button will begin flashing
when pressed.
(3) Press the page down button to go to PAGE 3.
(4) Turn F3 to set
DELETE
to ON, then press F3. The data saved in the event memory button
will then be cleared.
EVENT :CG WIPE:OVER WR:DELETE : : 3/3
RECALL : =OFF : =ENABL: >
ON
: :P.01
To Delete Data for an Event Page:
(1) Press EVENT in the MEMORY block. The [EVENT MEMORY] menu is displayed.
(2) Turn F1 to select an event page to be deleted.
(3) Turn F3 to set
PAGECLR
to CRNT (current), then press F3. The data saved in the event
page will then be cleared.
EVENT : PAGE :DIRECT :PAGECLR:RATE : 1/3
MEMORY : =
1
: =OFF : =
CRNT
: =0FF :L=10
To Delete All Event Data :
(1) Press EVENT in the MEMORY block. The [EVENT MEMORY] menu is displayed.
(2) Set
PAGECLR
to ALL, and press F3. All event data is cleared.
EVENT : PAGE :DIRECT :PAGECLR:RATE : 1/3
MEMORY : =0 : =OFF : =
ALL
: =0FF :L=10
