138
15-4-5. On-air Tally
The tally indicates which video is currently On-air (output from the program) and which is set
to be the next output. The multiviewer can display two types of tally indicators: Frame and
Marker. You can use either or both at the same time.
(1) Display [SETUP - OUTPUT - MV1] menu PAGE 5.
(2) Select a tally indication. Frame (FRAME) and square (MARKER) markers can be
displayed at the same time.
OUTPUT : FRAME :MARKER : :KEY TLY: 5/6
MV1 TLY : =
ON
: =
ON
: : =
OFF
:
Setting Example
Here, we assume that IN02 is displayed
in the M/E2 PGM and .IN01 is selected on
the M/E2 PST bus.
The tally frame and marker are displayed
on the screen. (See the menu above.)
KEY TALLY
Note that the "Key-On tally" information is included in the tally data as factory default.
If you need only "Background -On" tallies, set
KEY TLY
to OFF.
IMPORTANT
The on-air tally indication (RED and GREEN) is linked to the tally color (
TLY COL
)
setting. For example, the PGM tally color is set to RED and the PST tally color to
NONE, green tally (next indication) is not displayed. (See section 24-2-1. "Tally Color
Settings."
TALLY LINK
Another tally indication can be displayed on a multiviewer image screen.
For example, to display the IN05 tally indication on the IN06 video screen of the multiviewer,
set parameters as shown below in PAGE 6. Setting
LINK EN
to ON to enable all tally links set
in this menu.
OUTPUT : TALLY LINK :LINK EN: 6/6
MV1 TLY :SRC=
IN06
LINK=
IN05
: =
ON
:
Red:
On-air indication
Green:
Next indication
