FOR-A HVS-1000EOU, Руководство по эксплуатации

Страница: 71 / 204

59
Button Function Description
7 CH1 SELECT
Used to select DVE channel 1. (It also can be set at the menu CH SEL
parameter.)
8 INTERP
Used to select interpolation mode for the selected KF. Each time the button is
pressed, the setting is changed alternately as follows: CUT-> LINE ->
SMOOTH. Press RECALL (OVERWRITE) to confirm the setting.
9 KF INSERT Used to insert the current DVE operational status as a new keyframe.
STORE KF ADD Used to add the current DVE operational status as a new keyframe.
4 CH2 SELECT
Used to select DVE channel 2. (It can also be set by the menu CH SEL
parameter.) (Available only when LINE DVE uses 2 channels or a 2-channel
pattern)
5 KF DUR
Used to set duration time for the selected KF. Once the button is pressed,
numeric input is available on the keypad. Input the value and press RECALL
(OVERWRITE). When RECALL is pressed, the setting is confirmed and the
keypad is again returned to the USER PATTERN editing mode.
RECALL KF OVERWRITE
Used to write the current DVE operational status to a selected keyframe
(current keyframe).
2 KF COPY Used to copy a keyframe.
3 KF PAST Used to overwrite a keyframe.
+/-
SHIFT
KF INC/DEC
Used to select a keyframe.
+/-:
Forward direction
SHIFT and +/-: Reverse direction
CLEAR KF DELETE Used to delete a keyframe. (Press CLEAR and then press ENTER.)
ENTER PREV Used to preview user patterns.
IMPORTANT
Even when a menu other than the USER PATTERN menu is displayed, pressing the
DVE CH button changes the keypad to USER PATTERN editing.
8-2-4. Selecting the DVE Channel (Menu/Keypad)
The currently selected DVE channel (CUR CH) can be checked at the following parameters.
Section Parameter
Information section in menu CUR CH
USER PATTERN menu CH SEL
The DVE channel to be modified can be selected using the following buttons on the keypad.
Select CH1 Press 7 on the keypad.
Select CH2 Press 4 on the keypad.
Currently selected buttons are lit orange. Channels can also be selected using the menu CH
SEL parameter.
8-2-5. Creating New Keyframes
If no keyframe is saved to a selected user pattern, a new keyframe needs to be created first.
The following procedure is used to create a keyframe.
Assign LINE DVE to the PGM bus (See section 9-1 ”Assigning LINE DVE.”) To use two
channels, assign LINE DVE to the PST bus.
Modify DVE to create the DVE video that you want to register as a keyframe. (See
section 9-3 "LINE DVE Modify Setting Example.”)
Press STORE (KF ADD) on the keypad to create a new keyframe.