www.FoodSaver.com
Customer Service:
1 (877) 777-8042
E3
E4
FEA
TU
RES
1
Dry/Moist/Pulse/Sous Vide Settings Indicator Light
Shows whether Dry, Moist, Pulse, or Sous Vide Food Setting is selected.
2
Seal Indicator Light
This light has two uses:
1. Flashing light indicates sealing process is engaged.
2. Rapid Flashes to indicate error.
3
Vacuum Indicator Light
Flashing light shows Vacuum process is engaged. Once vacuum process is complete, it will
automatically shut off and transition to the Seal button to start the sealing process.
4
Power Light
Illuminates when the unit is in the OPERATE position. Shuts off automatically when latch is not
in OPERATE position.
5
Dry/Moist/Pulse/Sous Vide Settings Button
Press Mode button to select custom setting. Indicator light will illuminate next to the custom setting
that is initiated. Use Dry Mode for optimal vacuuming and sealing of dry foods. This is the default
setting. Use Moist Mode for optimal vacuuming and sealing of moist or juicy foods. Use Pulse Mode
and press and hold the Vacuum Button to manually control the vacuum function. Press Seal Button
when ready to seal bag. Use Sous Vide Mode for optimal vacuuming and sealing of bags to use in
Sous Vide cooking.
6
Seal Button
This button has three uses:
1. Press to create a seal when making bags from a FoodSaver
®
Roll.
2. Press to immediately stop the vacuum process and begin sealing the bag.
3. Press to create a seal on film bags (such as a potato chip bag) to keep food sealed airtight.
7
Vacuum Button
This button has two uses:
1. Press to vacuum seal and seal food airtight. Appliance shuts off automatically.
2. Press to pause vacuum process at any point.
The user-friendly, intuitive control panel makes it easy
for you to get the most out of your FoodSaver
®
System:
Vacuum
Indicator Light
3
Vacuum
Button
7
Seal Indicator
Light
2
Seal
Button
6
Power
Light
4
Dry/Moist/Pulse/Sous Vide
Setting Indicator Light
1
Dry/Moist/Pulse/Sous Vide
Mode Settings Button
5
H
OW
T
O
1. Make a Bag from a FoodSaver
®
Roll
1. Move Easy Lock Latch to open position. Open
appliance lid (
I
) and place roll into roll holder.
2. Lift up Roll Cutter Bar (
P
) and place bag material
beneath the cutter bar. Pull out enough bag material
to hold item being vacuum sealed, plus 3 inches
(7.62 cm). Lower the Roll Cutter Bar and slide Bag
Cutter (
L
) across Cutter Bar.
3. Insert one end of bag material across sealing strip.
4. Close lid and turn Easy Lock Latch to
OPERATE position.
5. Press Seal button.
6. When Seal Indicator Light turns off, sealing is
complete. Turn latch to OPEN position, lift lid
and remove bag.
Now you are ready to vacuum seal with your
new bag (see next page).
Place Bag on Sealing Strip
Place Roll into Roll Holder
Close and turn Easy Lock Latch to OPERATE position
Press Seal Button
How to...
Operate
Store
Open
FM2900_21EFSM2.indd 3-4
FM2900_21EFSM2.indd 3-4
2021/11/12 上午11:05
2021/11/12 上午11:05