Foma N900i '04.2, Руководство пользователя

Страница: 93 / 388

91
Making/Receiving Videophone Calls
● You can make a videophone call with steps 1 and 2 reversed. In this case, if you call a wrong number,
please press
y
to delete the display and then dial the correct number.
● When making a videophone call, you can use an entry in the phonebook, “Redial” or “Received calls”
as well a voice call.
● When you can make an emergency call (110, 119, and 118) on the videophone from the FOMA
terminal, your call is automatically switched to a voice call.
● Connection is not made if you make a videophone call to a phone that does not support the
videophone function, the other party’s videophone is out of the service area or is turned off. If you
make a videophone call to a phone that does not support the videophone function with the “Voice call
auto switch” (p.95) set to “ON”, your call is rejected before videophone connection is activated and is
automatically redialed as a voice call. Note that this operation may not work when you make a wrong
call such as a call to the access points for ISDN synchronous 64K or PIAFS, or a call to an ISDN
videophone that does not support 3G-324M (p.87) (as of Feb., 2004). Be aware that you may be
charged for a communication charge in this case.
● The “32K” communication speed is to make a videophone call with a device that cannot communicate
using “64K” depending on the network conditions, such as PHS. If you make a videophone call in
“64K” to a person in a different communication environment such as a “32K” area, it is automatically
switched to “32K” and redialed. Please note that even if you make a videophone call in “32K”, you will
be charged the same digital communication fees as in “64K”.
●
If your videophone call cannot be connected in a communication speed of “64K” with the “Voice call
auto switch ” (p.95) set to “ON”, it is automatically switched to a communication speed of “32K”. If the
videophone call cannot still be connected, it is switched to a voice call. When a videophone call fails,
the automatic switch of communication speeds and the movements of “Voice call auto switch” are as
follows:
●
Once the videophone call is connected, it is not redialed as a voice call.
● You cannot make a voice call or connect to i-mode during a videophone call.
●
When you receive a voice or videophone call during a videophone call, the call is recorded as a
“Missed call” record in the “Received calls” (p.151) and the “Missed call” desktop icon appears on the
standby display.
● i-mode mail and message request/free cannot be received during a videophone call and are once
stored in the i-mode center. Receive these stored i-mode mail and message request/free by “i-mode
checking” (p.105 and p.180 in
『 Application 』 ) after the videophone call ends.
●
You can receive SMS during a videophone call.
● When the “Low-voltage alarm” of “Recharge battery” appears during a videophone call, the other party
sees a message saying “
カメラオフ
Camera Off” and the call is disconnected.
● When no image is sent due to the other party’s setting, a substitute image is displayed.
●
Even when a substitute image is displayed during a videophone call, the digital communication charge
is charged.
●
You cannot switch to the Handsfree operation while making a videophone call.
● Ending a videophone call turns the handsfree operation OFF.
●
You can adjust the “Volume” (p.78) even when the Handsfree mode is set.
● During the Handsfree operation, if you increase the “Volume” level, it may cause noise depending on
your surrounding.
● If the background noise is loud during the Handsfree operation, you may not be able to talk in a good
condition such as intermittent voice reception. In this case, use the earphone/microphone.
● The videophone call duration is calculated as the “Digital communication” time. → p.161
●
You can switch to the handsfree mode when the manner mode is set. You return to the manner mode
when you select “OFF” in the handsfree mode or disconnect the call. The handsfree mode can be
retained even if you set the manner mode when the handsfree mode is set.
If the communication speed is “32K” If the communication speed is “64K”
If the “Voice call
auto switch” is
“ON”
If the “Voice call
auto switch” is
“OFF”
The communication speed is automatically
switched to “32K”. If the videophone call still
cannot be connected, it is switched to a voice call.
The communication speed is automatically
switched to “32K”. If the videophone call still cannot
be connected, the videophone call is hung up.
The videophone call is switched
to a voice call.
The videophone call is hung
up.
Making a Videophone Call