Foma F2402, Руководство пользователя

Страница: 144 / 172

142
Reference
¥V Setting connection indication codes
Selects the response code specifications while in connection.
This command is only available when the ATX command
(
→
P. 140) is other than 0.
AT
¥
V0: Not use extended result code
*1
AT
¥
V1: Use extended result code
*2
AT¥V1
OK
+CBST Setting bearer service
This command is for specifying bearer service settings for
using 64K data communication or videophone
communication.
<speed>
116: 64000bps (bit transparent)
*1
131: 32000bps (multimedia)
134: 64000bps (multimedia)
<name>
1: data circuit synchronous (UDI or 3.1kHz modem)
*1
<ce>
0: transparent
*1
*2
AT+CBST=[<speed>[,<name
>[,<ce>]]]
When "+CBST?",
displays
AT+CBST=<speed>,<name>,
<ce>.
+CEER Displaying reason for disconnection
Displays reason for disconnection of the previous
communication.
+CEER: <report> for reason for disconnection
(
→
P. 150)
(disconnect communication)
AT+CEER
+CEER:36
OK
+CGDCONT APN setting for packet sending
Sets access point (APN) during packet sending. See below
(1) for setting examples.
<cid>*: 1 to 10
<APN>*: optional
"*<cid>" is the number for managing access point (APN) of
packet communication to be registered in FOMA terminal. For
FOMA terminal, "1 to 10" are available. "mopera.ne.jp", which
is an APN to connect to mopera, is registered in "<cid>=1"by
default. An <APN> consists for characters indicating access
points.
(1) Command for registering the APN name of "abc" (when
<cid> is 3)
AT+CGDCONT=3,"PPP","abc"
OK
Operation when parameter is omitted
AT+CGDCONT= :Clears all the <cid> settings.
However, if "<cid>=1" is set, the
default settings are restored.
AT+CGDCONT=<cid> :Clears the settings of the specified
<cid>. However, if "<cid>=1" is set,
the default settings are restored.
AT+CGDCONT=? :Displays the list of specifiable values.
AT+CGDCONT? :Displays the current settings.
"mopera.ne.jp" is registered in "<cid>=1" by default. You can
change it if you wish.
*4
AT+CGDCONT=[<cid>
[,"PPP"[,"<APN>"]] ]
AT command Functions and overview Form/command example