36
OPERATION
ORIGINAL INSTRUCTIONS
LOCK HANDLE
LIFT STRAIGHT UP
TENSION ADJUSTERS
PIN
SPIN DIRECTION
CONNECT SPIN DRIVE
The SPIN DRIVE attaches to the end of the reel
shaft or a drive system component. Consult the
cutting unit manufacturer for proper spin drive
placement and attachment.
The SPIN DRIVE
has a 1/2" male square end. To
spin the reel you will need an adapter to connect
the SPIN DRIVE
to the cutting unit. The machine
was shipped with 8, 9, and 11 spline adapters (Part
# 3706130). See FIG. 50.
Use one of these adapters to connect the SPIN
DRIVE to the cutting unit. See FIG. 51. If the
cutting unit cannot be connected with one of
these adapters contact the reel manufacturer for
additional information.
To move the
SPIN DRIVE
to the other side of the
machine, unlock the LOCK HANDLE
, rotate the
assembly back, and lift straight up. Once moved
to the other side, drop the
PIN
on the bottom of
the SPIN DRIVE
assembly into the block on the
end of the tooling bar. See FIG. 51.
After the
SPIN DRIVE
is connected to the cutting
unit, press the MOTOR POSITION on the ACCU-
TOUCH 3 CONTROL to select the direction the
motor will rotate. Example: If the
SPIN DRIVE
is on right side, press the RIGHT SIDE MOTOR
POSITION icon on the screen.
NOTE: The spin rotation is the same as the
grinding wheel - clockwise looking from right end.
FIG. 51
FIG. 48
SPIN DRIVE
DRIVE
ADAPTER
CUTTING
UNIT
FIG. 49
FIG. 52