Focusrite clarett octopre, Руководство пользователя

Страница: 5 / 18

5
7. Input signal level meters: eight LED bargraphs, one per channel. Segments indicate
-42, -18 & -12 dBFS (green), -6 & -3 dBFS (yellow) and 0 dBFS (red). Input signals are metered
post the input gain controls, so you can see the levels being sent to the digital outputs.
8. INSERT and AIR function master switches: two soft switches with internal LEDs
(INSERT = green, AIR = yellow) which determine the function of the per-channel INSERT/AIR
switches [6].
9. SAMPLE RATE – a soft switch which steps through the six available sample rate settings,
the current rate being indicated by one of the adjacent green LEDs. The sample rate in use is
stored in memory so that it is retained when the unit is switched off.
10. SYNC – a soft switch which steps through three available digital sync sources (Internal, ADAT
or Word clock), the current source being indicated by one of the adjacent red LEDs. The source
in use is stored in memory so that it is retained when the unit is switched off.
11. – a green “Locked” LED which illuminates when the unit has locked to the available sync
source, indicating that it is ready to use.
12. ADAT
>
LINE – this soft switch modifies the operating mode of the unit. When not selected,
Channels 1 to 8 feed both the rear panel LINE OUTPUT connector (analogue) and the ADAT
ports (digital). When ADAT
>
LINE mode is selected, the LINE OUTPUT connector provides
an 8-channel analogue version of the incoming digital audio at the ADAT input ports instead.
The adjacent red LED confirms that this mode is active. In this mode, the analogue inputs
(Channels 1 to 8) remain routed to the ADAT digital outputs. The mode in use is stored in
memory so that it is retained when the unit is switched off.
13. POWER – AC power switch and green LED.
14. Rack ears for mounting the Clarett OctoPre in a standard 19” equipment rack.