Focusrite clarett octopre Скачать руководство пользователя страница 12

Страница: 12 / 18

Example Setups

1 .

Clarett OctoPre with audio interface: OctoPre as clock source Master

Clarett OctoPre

Clarett 8Pre

Clock set to ADAT using Focusrite Control

Clock set to Interal via the front panel

Here the OPTICAL OUT on the Clarett OctoPre is connected to OPTICAL IN on a Focusrite

Clarett 8Pre audio interface with a single optical cable. Both units are running at 44.1 kHz sample

rate. The OctoPre’s clock source is set to INTERNAL, and the 8Pre is synchronised to it because its

clock source is set to ADAT (via Focusrite Control).

This setup would, for example, enable up to 16 mic or line sources to be recorded in a DAW

simultaneously, and would thus be ideal for recording a live band. It would also be appropriate for

any other audio interface which has an ADAT input.

2 .

Clarett OctoPre with audio interface: audio interface as a clock source Master

Clarett 8PreX

Clarett OctoPre

Clock set to WORD via the front panel

Clock set to Internal via Focusrite Control

Here OPTICAL OUT on the Clarett OctoPre is connected to OPTICAL IN on a Focusrite Clarett 8PreX

audio interface with a single optical cable. Both units are running at 44.1kHz sample rate. The

OctoPre’s clock source is set to WORD, and its WORD CLOCK IN input is connected to WORD CLOCK

OUT on the Clarett 8PreX with a BNC cable. The Clarett 8PreX’s clock source is set to INTERNAL (via

Focusrite Control), thus making it the sync master. It would also be appropriate for any other audio

interface which has an ADAT input and a word clock output.

Содержание clarett octopre



















Результаты поиска

Содержание clarett octopre

Отзывы:

Похожие инструкции для clarett octopre

Бренды по названию

Популярные бренды

Focusrite clarett octopre, Руководство пользователя

Результаты поиска

Содержание clarett octopre

Отзывы:

Похожие инструкции для clarett octopre

Бренды по названию

Популярные бренды