Focal 914-HDE Скачать руководство пользователя

Страница: 46 / 49

Model 914-HDE User Manual

Focal Technologies Corporation

9-1

A Moog Inc. Company

Document Number: 914-0601-00 Rev. 4.0

Feature Upgrades

If a feature upgrade has been purchased, these are the installation instructions. Feature upgrades allow 914-
HDE L1 cards to be upgraded to M1 version, as an example. Contact Focal for upgrade options for your cards.

1. Obtain Feature upgrade codes from Focal, there are 2 codes: Unlock Code and Feature Code. Both

codes are 16 digit hexadecimal alpha numeric numbers

2. Open the 914-HDE diagnostic GUI with the Console 914-HDE connected to a local COM port as per

manual section 3.

3. Use the

“Tools” slide over menu on the left side, and select the “Configuration Tool”.

4. Enter both the Unlock and Feature Code, and select the destination card (remote or console), then

press “Apply”

5. Both remote and console cards can be upgraded from the console side, there is no need to directly

access the remote card, but it must be powered and linked optically to receive the upgrade.

Figure 9-1: Feature Update Via Configuration Tool

Содержание 914-HDE


















































Результаты поиска

Содержание 914-HDE

Отзывы:

Похожие инструкции для 914-HDE

Бренды по названию

Популярные бренды

Focal 914-HDE, Руководство пользователя

Результаты поиска

Содержание 914-HDE

Отзывы:

Похожие инструкции для 914-HDE

Бренды по названию

Популярные бренды