Model 914-HDE User Manual
Focal Technologies Corporation
5-6
A Moog Inc. Company
Document Number: 914-0601-00 Rev. 4.0
5.1.7 914-VDX Configuration
By default, all 914-VDX cards are shipped with these settings:
Remote configuration
Both video channels are inputs and enabled
All serial channels are set to RS232
To change these settings, connect the console 914-HDE to the 914 Diagnostic GUI via a local COM port.
Ensure a stable optical link is present and the cards are stacked together in the correct order with the correct
expansion settings as per the previous section.
From the GUI, click on the
“Card Info” then “Configuration” tab as shown in Figure 5-11. Typically the console
stack side needs to be changed from the default remote with video inputs, to console with video outputs. Once
the desired “new” settings are selected, press apply to save them to the card.
Figure 5-11: 914-VDX Video Configuration
