Ignore the error message, it is normal signifying the end of the data list. The string
values that are returned, which are each gateway address of each dynamic subnet on
the system, are the identifiers used to reference usage and total available data for
each subnet. For example:
This command will retrieve the used IP addresses on the subnet 10.31.128.0/24:
snmpget -On -v 1 -c lnx-snmp patriot-1.network1.net
1.3.6.1.4.1.2021.50.90.1.
10.31.128.1
Output would look something like this:
.1.3.6.1.4.1.2021.50.90.1.
10.31.128.1
= INTEGER: 0
And this command will retrieve the total available IP address on the subnet
10.31.128.0/24:
snmpget -On -v 1 -c lnx-snmp patriot-1.network1.net
1.3.6.1.4.1.2021.50.100.1.
10.31.128.1
Output would look something like this:
.1.3.6.1.4.1.2021.50.100.1.
10.31.128.1
= INTEGER: 253
Total Dynamic data per network
• 1.3.6.1.4.1.2021.50.110.(1/2 for type of network auth/standard) will list all available
dynamic networks for which used and available data may be retrieved. The returned
string will consist of the network name, as well as an id number in brackets. For
example: .1.3.6.1.4.1.2021.50.110.2.15 = STRING: "FNGiTEST[15]". The ID
number in brackets is the id used to retrieve the data.
• 1.3.6.1.4.1.2021.50.120.(1/2 for type of network auth/standard).(id from the
brackets) will retrieve total used IP address number for dynamic from the chosen
network
• 1.3.6.1.4.1.2021.50.130.(1/2 for type of network auth/standard).(id from the
brackets) will retrieve total available IP address number for dynamic from the
chosen network
Chapter 10: Monitoring and Graphing the System
71
DHCPatriot Version 6 Operations Manual This document © 2017 First Network Group Inc. All Rights Reserved
Содержание DHCPatriot Version 6
Страница 1: ...Operations Manual Version 6...
Страница 2: ......
