FNGi DHCPatriot Version 6, Руководство по эксплуатации

Страница: 46 / 104

Adding
To add a maintenance subnet to a network, first choose the Shared Network that the
subnet will be attached to. Then type the wire address of the subnet. Enter the subnet
mask. Then click on Commit. On screen help is available if you are unsure how to
complete the form.
Editing
To edit a maintenance subnet, simply click Edit on the desired subnet in the list at the
bottom. The form will be populated with the current values. Make changes as
necessary and then click on Commit.
Removal
To delete a maintenance subnet, click on the Delete link of the subnet you wish to
delete in the list at the bottom. A confirmation dialog will appear. Click OK to delete the
subnet, or click Cancel to not delete and return to the list and form.
Additional Configuration Tasks
The Standard DHCP Actions menu contains several tasks that will be covered here.
They are covered here because it is assumed that systems administrators will be
performing these tasks as opposed to tech support or customer service. We thave
grouped tasks common to those disciplines later in the manual.
There is also a Standard DHCP Reports menu section with some reports in it. These
reports are common to both Authenticated and Standard DHCP and therefore are
covered in the same section later in the manual.
Known Client
If one or more of your dynamic
subnets have been configured
to allow only known clients,
then said known clients must
be configured here before they
will be able to obtain an IP
address. Clients that are not
configured here will not be able
to obtain an IP address unless
another dynamic subnet exists
that does not have allow only
known clients checked. A
mixture of known clients and static IP assignments could also exist. Some may find this
Chapter 7: Standard DHCP 46
DHCPatriot Version 6 Operations Manual This document © 2017 First Network Group Inc. All Rights Reserved
Figure 7.5