FM ST Series, Инструкция по эксплуатации

Страница: 31 / 48

31
Mod. B4600Humid
11.3 Preliminary operations
Remove the protection film from the unit. Clean the adhesive residues with an appropriate solvent. Never use
abrasive or acid products or tools that may damage the surface.
11.4 Placing the unit
Place the oven in the selected work place and keep a safe distance as indicated below. Check that the unit has
sufficient cold air inlets through the ventilation registers ensuring correct operation. Otherwise, the unit may overheat,
and some components may be destroyed.
- If the oven is installed on an auxiliary support, it must be fixed to it.
-
The facilities must be conditioned and meet the regulations in force with regard to safety in installations.
- In addition, the unit must be protected from atmospheric agents
-
The ambient temperature may range between 5ºC and 35ºC maximum for correct operation of the unit
- Humidity should not exceed 70%.
We recommend leaving a 120 mm gap for repair and if there are heat sources or combustible elements, that
safety distance must be 700 mm minimum. We also recommend ensuring good ventilation of the unit to prevent
overheating its components.