FS-G7P
Digital Proportional Radio Control System
Website
22
6.30 System Settings - Stick Calibration
The CALIBRATION(stick calibration) function is used to restore the data of the neutral position
and endpoints, which are changed for certain reasons after the transmitter has been used for a
long time. The ST, TH and VR2 channels can be recovered by using this function please refer to
the chapter for stick calibration.
Function settings:
1.
In the CALIBRATION menu, turn the steering wheel left and right to the maximum and return
it to the neutral position; pull the trigger back and forth and return it to the neutral position;
and turn VR1 to its maximum travel and return it to the neutral position, then turn VR2 left
and right to the maximum travel and return it to the neutral position; and finally press the OK
key to confirm the calibration.
2.
Carry out a test to confirm that all channel outputs set after calibration are functioning as
expected.
6.31 System Settings - Firmware Update
Function settings:
In the SYSTEM SET menu, select the item to be set by pressing the UP/DOWN key and press the
OK key for editing. Set the desired value by pressing the UP/DOWN key and press the OK key to
confirm the adjustment.
The FW UPDATE(firmware update) function is used for synchronizing the system to the latest
version and experiencing better functions and services when the firmware is upgraded by the
manufacturer.
Function settings:
Note: This function is only available in the FlySky Assistant software provided by FLYSKY.
1.
In the FW UPDATE menu, a dialog box will pop up. At this time, you can select YES by pressing
the UP/DOWN key and press the OK key to start the update session. The current menu will be
closed directly once the update session is completed.
2.
Carry out a test to confirm that the transmitter functions normally after the update.
Note: Always ensure sufficient power supply for the transmitter when using this function.
Note: Turn off the transmitter to exit the firmware updating state during the firmware updating
process if need.
