FS-G7P
Digital Proportional Radio Control System
Website
16
6.16 Timer
Timer menu provides two functions: TIMER and LAP LIST.
Function settings:
In the main interface, press the OK key to enter the function menu. Then select the TIMER menu
by pressing the UP/DOWN key. Press the OK key to enter the edit state.
6.17 Timer – Timer
The Timer function is used for timing in races, including counting, countdown, and lap counting.
You can also use it to test a tank of fuel or a full battery and confirm the usage time. In the alarm
parameter setting, you can set the alarm prompt time when the timer starts. For example, set to
05M00S. This means the alarm will start when the countdown reaches 5 minutes.
Function settings:
1.
In the TIMER menu, select the TIMER and press the OK key.
2.
Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
the edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment.
3.
Test the function to confirm that all setting outputs operate normally as expected.
6.18 Timer-Lap List
The data display page is available only when you use the lap counting function. You can view the
entire duration, the fastest lap time, and the average lap time. Thus, you can easily judge and
adjust the operation to finally achieve a good result. The start and stop of the lap time can be set
through the Key Setting menu see Key Setting menu for details.
Press and hold the Middle button of the Five-way switch until a pop-up menu comes along, then
select OK, afterwards press the Middle button to clear the timer-lap list.
6.19 Switch Assignment
The key setting function is to assign switches to some functions in order to control the output of
the actions needed through the specified switch. According to the types, it includes trim, switch,
and knob.
Function settings:
1.
In the SW ASSIGN(switch assignment) menu, select a item and press the OK key.
2.
Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
