Website
7
5. System Interface
[1] Model name and model number
[6] Throttle trim display
[2] Steering channel(ST) output display
[7] Steering trim display
[3] Throttle channel(TH) output display
[8] Transmitter voltage display
[4] Timer
[9] Signal and strength
[5] DR output display
Main system interface
Enter the main system interface after power-on.
The timer display area of the main interface can be set to display signal strength and BVD voltage information. The
steps are the following.
1. Press and hold the MIDDLE key of the five-way key for 2S to select the timer display area.
2. Press the MIDDLE key of the five-way key to access the HOME DISPLAY menu, then select SENSOR > OK.
It can set the sensors displayed on Sub-page 2 including name, ID, and value. The setting steps are as follows.
1. Enter the main system interface and press the DOWN key to access Sub-page 2.
2. Press the MIDDLE key of the five-way key to access the SELECT SENSOR menu, then select the sensor you want to
dispaly.
Sub-page 1
After power-on, enter the main system interface and press the UP key. Press the return key to return to the main system
interface.
Sub-page 2
After power-on, enter the main system interface and press the DOWN key. Press the return key to return to the main
system interface.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]