FS-G7P
Digital Proportional Radio Control System
Website
14
6.12 Auxiliary Channels-CH3 to CH7
For some models with complex functions, we provide up to 7 channels of output, 5 of which are
auxiliary channels for the most effective control of multiple functions in different ways. The
Auxiliary Channels function is used to set the control settings for CH3 to CH7, assigning targeted
controls to the channels for operation.
Function settings:
1.
In the AUX.CH menu, select CH3 to CH7 and press the OK key.
2.
Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
the edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment.
3.
Test the function to confirm that all channel outputs operate normally as expected.
6.11 Settings-CH SPEED
This function allows you to set the steering speed, forward speed and brake speed. The minimum
delay is 0.00S, and maximum delay is 10.00S, and the default is set to 0.00S. The djustment step
is 0.02S.
ST
: To set steering response speed. It can set respectively the speed when steeringwheel is
turning or steeringewheel is returning to neutral positon.
FRONT
: To set response speed when moving forwards. It can set respectively the speed when
throttle is fordwarding or returning to neutral positon.
BRAKE
: To set response speed when moving backwards or braking. It can set respectively the
speed when throttle is moving backwards/braking or returning to neutral positon.
Function settings:
1.
In the SET menu, select the CH SPEED function and press the OK key.
2.
Select the item you need to adjust by pressing the UP/DOWN key. Press the OK key to enter
the edit state. Then adjust it by pressing the UP/DOWN. Press return after adjustment.
3.
Test the function to confirm that all channel outputs operate normally as expected.
