Flyability Elios 3 Скачать руководство пользователя страница 77

Страница: 77 / 94

ELIOS 3 User Manual

B03

Battery communication error

The battery management system is unresponsive—reconnect

and try again. If the problem persists, use a different battery and

restart the drone.

B04

Battery permanent failure

The battery is damaged and you shouldn’t ﬂy the drone with it.

We recommend you land immediately, and you replace the

battery.

B05

Battery lever unlatched

The battery lever is unlatched, and so the battery is not attached

properly. Check that the lever is closed. Restart ﬂying only once it

has been closed correctly.

B06

Too cold battery

The onboard system has evaluated the battery as risky. Batteries

with the same conditions can have critical issues during ﬂight,

including loss of power during ﬂight and crashes, even if charged

at a good level. Arming is impossible in this situation for safety

reasons.

Replace the battery before ﬂight.

If you are in a cold environment, such as during winter, the

battery can be faulty due to the low temperature, although it is

otherwise in good condition. Replace the battery with one at a

normal ambient temperature (typically 10°C-30°C / 50°F - 86 °F).

One recommended way to keep batteries warm is by using a

special LiPo-safe bag with built-in electric temperature control.

B07

Too warm battery

The onboard system has evaluated the battery as risky. Batteries

with the same conditions can have critical issues during ﬂight,

including loss of power during ﬂight and crashes, even if charged

at a good level. Arming is impossible in this situation for safety

reasons.

Replace the battery before ﬂight.

If you are in a hot environment, such as during summer, the

battery can be faulty due to the high temperature, although it is

otherwise in good condition. Replace the battery with one at a

normal ambient temperature (typically 10°C to 30°C / 50°F - 86 °F).

One recommended way to keep batteries cool is by using a

special LiPo-safe bag with built-in electric temperature control.

B08

Controller battery low

Controller battery is low. Even if the controller does not discharge

as fast as the aircraft, consider charging it soon.

B09

Tablet battery low

Tablet battery is low. Even if the tablet does not discharge as fast

as the aircraft, consider charging it soon.

ELIOS 3 User Guide

Page 77 of 94

Содержание Elios 3































































































Результаты поиска

Содержание Elios 3

Отзывы:

Похожие инструкции для Elios 3

Бренды по названию

Популярные бренды

Flyability Elios 3, Руководство пользователя

Результаты поиска

Содержание Elios 3

Отзывы:

Похожие инструкции для Elios 3

Бренды по названию

Популярные бренды