background image

7

Modes and Functions

There is often no way to know by inspection or by 
audio monitoring if the wire pair you are connecting to 
is a high-speed data line or not. Most high-speed data 
is above the human hearing range so listening to the 
line in Monitor mode may not allow you to identify it 
as a data line. If you see the 

DATA DETECTED

 message, 

chances are you have accidentally connected to a data 
line. If so, disconnect the test set from the line, being 
careful not to short the clip leads together in the 
process. 

Caution

If you have accidentally connected to a data 
line, do not press the down arrow because 
overriding will cause the test set to go off-
hook and take the data service down.

In some situations you may want to go off-hook, as 
described in the next section.

Data Lockout Override

Caution

Shorting the Tip and Ring leads together 
while connected to a data line will cause 
disruption to the data.

Whenever you try to go off-hook on a high-speed data 
line, the TS25D Test Set will go into Data Lockout mode 
and will not go off-hook. This is to protect data 
services, most of which would be corrupted by loading 
the line with the low impedance of an off-hook 
telephone. But ADSL (Asymmetrical Digital Subscriber 
Line) is a different circumstance. 

ADSL is a high-speed data service intentionally 
designed to co-exist on the same wire pair as standard 
analog telephone service. If you try to go off-hook on a 
wire pair carrying both ADSL and analog telephone 
service, the TS25D Test Set will detect the ADSL data 
signal and go into Data Lockout mode as it would on 
any data line. You will see the message 

DATA 

DETECTED, DOWN ARROW TO OVERRIDE

. Now, if you 

want to go off-hook to access the analog phone service 
sharing the line with ADSL, press the down arrow as 
instructed on the LCD. 

The test set will override the lockout, will go off-hook 
and draw dial tone without disturbing the co-existing 
ADSL service. The TS25D Test Set has circuitry that 
protects the ADSL service when it is off-hook. Going 
off-hook on ADSL lines is the most common use of 
Lockout Override.

There is another case where the override function may 
be needed. You may encounter the rare circumstance 
where the analog telephone line you connect to is not 
carrying any data but there is enough high frequency 
noise on the line that theTS25D Test Set thinks there is 
high-speed data on the line. If you know you are 
connected to such a line, use the Lockout Override 
function to go off-hook. This usually only happens 
when the telephone line is near a commercial AM 
radio broadcast antenna.

There is a provision for turning the data lockout 
function off. When Data Lockout is turned off, the test 
set will go off hook on a powered line when switched 
to Talk (

T

), even if data is present. When Data Lockout 

is off, the test set will still detect data in Monitor mode. 
To learn how to turn Data Lockout on and off, refer to 
the System Configuration section.

High Voltage Lockout

Caution

Do not short the test set leads to each other 
while it is connected to a line carrying high 
voltage.

The TS25D Test Set is designed for use in environments 
where analog voice lines co-exist with lines that carry 
high DC voltages. When the TS25D Test Set is switched 
to Talk mode, it tests the line for high-speed data and it 
measures the DC voltage on the line before it goes off-
hook. If the DC voltage exceeds 140 V, the test set will 
prevent itself from going off-hook and will display 

HIGH VOLTAGE LOCKOUT

Содержание TS 25D























Отзывы: