background image

2

TS25D Test Set

Users Guide

Safety Information

The following IEC symbols are used either on the test 
set or in the manual:



Warning

Do not use the test set if it is damaged. 
Before you use the test set, inspect the case. 
Look for cracks or missing plastic. Pay 
particular attention to the insulation 
surrounding the connectors. 

Do not use test leads if they are damaged. 
Examine the test leads for exposed metal 
and damage to the insulation. Make sure 
the wear indicator on the cords does not 
show. The wear indicator is the white layer 
below the outer, braided layer. Verify the 
continuity of the test leads.

If this product is used in a manner not 
specified by the manufacturer, the 
protection provided by the product may be 
impaired.

Design Features

Design features of the TS25D Test Set include:

Three main modes: Talk (off-hook), Monitor (on-
hook and listening), and Off

Data Lockout and Override

Low and High Voltage Lockout

Last Number Redial 

Mute Function

Hook Flash

Memory Dialing

Tone and Pulse Dialing

Displays Voltage when on-hook

Displays Current when off-hook

Polarity Indication

Detect and Display Caller ID/Call Waiting ID 
(CIDCW)

Toner

Talk Battery

DTMF Detection including A-D

Headset Compatible

Field Replaceable Battery

Field Replaceable Line Cord

Differences Between TS25D 
and TS25D CO Models

The information in this guide applies to the standard 
TS25D Test Set and the TS25D CO (Central Office) Test 
Set, except where noted. Differences between the two 
models are described in the following sections:

Speaker, page 4.

Belt Clip, page 4

Line Cord, page 4

Speed Dialing, page 11

System Timeout, page 15

Speaker Timeout, page 15

Physical Characteristics

Figure 1 and the following sections describe the tester’s 
features.

Warning: Risk of personal injury. See the 
manual for details.

Caution: Risk of damage or destruction to 
equipment or software. See the manual 
for details.

Warning: Risk of electric shock.

Earth ground

Conformité Européenne. Conforms to 
relevant European Union directives.

Do not put products containing circuit 
boards into the garbage. Dispose of 
circuits boards in accordance with local 
regulations.

Содержание TS 25D























Отзывы: