background image

T+/T+PRO English Instruction Sheet 

Page 16  

 

only for a MAXIMUM of 30 seconds and then 
disconnect for a MINIMUM of 300 seconds. 

Voltage 
Hazard LED:
 

LEDs turn on @ voltages > 30 V ac/dc 

±

 35 % 

LEDs:

 

LEDs turn on @ between 70 % and 100 % of the 
indicated voltage on the LED, except for the 12 V LED 
which turns on @ between 50 % and 100 %. 

EMC Compliance:  EN61326-1:2005 Class B emissions and immunity in 

field strengths between 1 V/m and 3 V/m add  
8 % of range. 

Accuracy: 
AC voltage: 

±

 (3 % rdg. + 2 digits) 

DC voltage:  

±

 (2 % rdg + 2 digits) 

Resistance: 

±

 (5 % rdg + 3 digits) 

LCD Resolution: 

0.1 V for voltages < 50 V, 1 V for voltages 

 50 V, 

0.01 k

Ω

 at resistance measurement 

GFCI Test  
Current:  

100 V - 150 V @ 6 mA  - 9 mA ac 

 

 

150 V – 240 V < 12 mA 

Standard Input  
Test Current: 
 

< 5 mA 

Size (HxWxL):        1.3 in x  2.15 in x 7.6 in  
Weight:                   9.9 oz 

LIMITED WARRANTY & LIMITATION OF LIABILITY 

This Fluke product will be free from defects in material and workmanship 
for two years from the date of purchase. This warranty does not cover 
fuses, disposable batteries, or damage from accident, neglect, misuse, 
alteration, contamination, or abnormal conditions of operation or handling. 
Resellers are not authorized to extend any other warranty on Fluke’s 
behalf. To obtain service during the warranty period, contact your nearest 
Fluke authorized service center to obtain return authorization information, 
then send your defective Tester to that Service Center with a description of 
the problem. Replace depleted batteries immediately to avoid Tester 
damage from battery leakage. 

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER 
WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, 
ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE FOR ANY 
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES 
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some 
states or countries do not allow the exclusion or limitation of an implied 
warranty or of incidental or consequential damages, this limitation of 
liability may not apply to you. 

Fluke Corporation 

P.O. Box 9090 

Everett WA 

98206-9090 

Fluke Europe B.V. 

P.O. Box 1186 

5602 B.D. Eindhoven 

The Netherlands 

11/99 

1.800.868.7495

[email protected]

Fluke-Direct

.ca

Содержание T+

















Отзывы: