T+/T+PRO English Instruction Sheet
Page 10
Testing for Continuity
XW
Warning
To avoid electrical shock:
•
Make sure the power to the circuit is turned off and
all capacitors are discharged.
•
If the beeper is disabled, the Tester will not beep and
only
P
will light. On the T+ PRO, the display will
also show
F
.
To measure continuity, turn off circuit power and connect the
probes to the circuit under test. Continuity (a resistance less than
20 k
Ω
) is indicated by the beeper and a lighted
P
. If the beeper
is disabled, it will not sound during this test. The T+PRO shows
F
on the LCD. If the resistance is greater than 20 k
Ω
, the beeper will
not sound and
P
will not light. Refer to Figure 3.
open
CONTINUITY
CONTINUITY
48
24
12
CONTINUITY
CONTINUITY
48
24
12
eqc02f.emf
Figure 3. Continuity Test
1.800.868.7495
Fluke-Direct
.ca
