T+/T+PRO English Instruction Sheet
Page 11
Measuring Resistance (T+ PRO Only)
XW
Warning
To avoid electrical shock when measuring resistance
in a circuit, make sure the power to the circuit is
turned off and all capacitors are discharged.
To measure resistance, turn off the circuit power, press
O
, and
place the test probes across the resistance under test. For
resistances less than 9.99 k
Ω
, the T+PRO display shows the
resistance value. For greater resistances, the display shows OL.
See Figure 4.
DISPLAY O
N
>10
V
eqc04f.eps
Figure 4. Measuring Resistance
1.800.868.7495
Fluke-Direct
.ca