1
Before You Start
Safety Information
The OptiView
TM
Workgroup Analyzer (hereafter referred to as the “analyzer”)
complies with:
•
Class 1 Laser product 21 CFR 1040.10 & 1040.11, CFR(J)
•
CSA C22.2 No 950, and EN60950 2
nd
edition
The following symbols are used throughout this document:
j
NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
W
PLEASE READ MANUAL FOR SAFETY
W
Warnings
To avoid possible electric shock or personal injury, follow
these guidelines:
•
Do not use this product if it is damaged. Before using
the product, inspect the case. Look for cracked or
missing plastic. Pay particular attention to the
insulation surrounding the connectors.
•
Do not operate the product around explosive gas,
vapor or dust.
•
When servicing the product, use only specified
replacement parts.
•
This product contains a Class I laser (OptiView
TM
Workgroup Pro and Pro Gigabit models), looking into
the laser port may cause eye damage.
•
Do not connect a telephone line to this product.
•
If this product is used in a manner not specified by the
manufacturer, the protection provided by the product
may be impaired.
W
Cautions
To avoid possible damage to the analyzer and to the
equipment under test, follow these guidelines.
•
Use the proper terminals and cable for all connections.
Содержание OptiView Series
Страница 42: ...OptiView TM Getting Started Guide 38 ...