Fluke NORMA 4000 Operators, Руководство пользователя, Страница: 141 / 184

Remote Control - Description of Commands
Commands and Queries
4
4-93
STATus:QUEStionable:ENABle <value>
Description
Sets the enable mask that allows true conditions in the event register to be reported in the
summary bit. If a bit is 1 in the enable register and its associated event bit transitions to
true, a positive transition will occur in the associated summary bit. The command accepts
parameter values of either format in the range 0 through 65535 (decimal) without error.
The query response format is <NR1>.
Parameter(s)
bit 0 Voltage summary questionable.
bit 1 Current summary questionable.
bit 5 Frequency questionable.
*RST state
0
Example(s)
STAT:QUES:ENAB 35
STAT:QUES:ENAB? Response:
35
Invalidates
-
Invalidated by
-
STATus:OPERation:CONDition?
Description
Returns the contents of the condition register associated with the status structure defined
in the command. Reading the condition register is nondestructive. The response is (NR1
NUMERIC RESPONSE DATA) (range: 0 through 32767).
Response
bit 2 Ranging (changing range).
bit 3 Sweeping (memory recording in progress).
bit 5 Waiting for trigger.
bit 8 Synchronized (if sync source changes, there is a glitch).
bit 10 Averaging (averaging in progress, at the end of each averaging cycle, there is a glitch).
bit 12 Spectrum CALCulation in progress.
*RST state
Has no effect.
Example(s)
STAT:OPER:COND? Response: 1280 (synchronized & averaging)