Fluke 750SW, Руководство пользователя

Страница: 55 / 226

System Options
7.2 System Settings Tab
7
7-5
of 99. Entering a value greater than zero prevents users from continually using the same
password over and over. The higher the number used, the greater your system security
will be. For example, if you enter “1”, then when a user’s password expires, the system
will remember the last password the individual used, and force them to enter a different
password before they can use their original one again.
7.2.7 Minimum Password Age To Allow Change (Days)
Depending upon the setup of the system, users may be forced to change their password
when it expires. However, DPCTrack2 also allows for a user to manually change their
password at their discretion by typing a new password into the New Password and New
password confirmation fields during a logon. Therefore, this system option is used to
establish the minimum age in days that a user’s password must be before they may
manually change it. Any numeric value may be entered into this field up to a value of
999, so once a value has been set, users will be restricted from changing their password
unless it has met the minimum age requirement established.
Note
The Number of Days Before User’s Password Expires must be greater than
Minimum Password Age.
7.2.8 Number Of Minutes Before Time-Out
This field is used to set the number of minutes that are allowed to pass before a user’s
workstation times-out due to inactivity. Any numeric value may be entered into this field
up to a value of 99,999 minutes. When the workstation times-out, a logon screen titled
“Session Locked” will appear. You must then enter your password in order to unlock the
program and continue working. Any unsaved data or records that you were working with
prior to the session time-out will be available after logging back onto the program.
7.2.9 System Date Format
This field is used to set the system date format that you would like to see throughout the
program. You may select one of the three options that are available on the field’s drop-
down list. Once you have made your selection and saved the setting, the data format
selected will be seen in every area of the program where a date field exists.
7.2.10 System Decimal Number Format
This field is used to set the decimal number format that you would like to see throughout
the program. You may select one of the two options that are available on the field’s drop-
down list. Once you have made your selection and saved the setting, the decimal number
format selected will be seen in every area of the program where a number field exists.
7.2.11 Default Skin
This field is used to define the default skin that DPCTrack2 will use the first time a user
logs in.
7.2.12 Allow User Skin Override
This field is used to control whether or not users have the option of setting the application
skin. When this option is turned off the Skins submenu will not appear when the user
right-clicks on the Record Toolbar.
7.2.1.13 Explorer Display Format
This setting allows you to define how the DPCTrack Explorer will be displayed:
•
Item ID
•
Item ID : Description
•
Description : Item ID
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com