Fluke 750SW, Руководство пользователя

Страница: 155 / 226

Calibration Screen
19.3 Test Results Tab
19
19-7
you have finished making modifications, you may click the Protect Specs button to shield
the columns again from accidental modification. The Protect Specs button appears when
you click the Modify Specs button, see Figure 19.3 for an example.
Figure 19.3
There are several important things to remember when you elect to modify the calibration
specifications for an item when entering its calibration record. These are as follows:
Modifying an item’s calibration specifications in the CALIBRATION screen will not
alter its master record. Permanent changes to calibration specs must be made in the
MASTER INSTRUMENT, LOOP RECORD or TEST INSTRUMENT screens.
If a “Linear” or “Square Root”
Correlation to Output was selected on the calibrated
item’s master record, then the output values in the grid on the CALIBRATION screen
will not be modifiable, however any changes made to input values will automatically
trigger an update to their corresponding output values.
Options selected on the COMPANY RECORD screen may affect your ability to modify
information in the calibration specifications grid. (See Chapter 9 for more information.)
19.3.4 Classifying the Result of a Calibration
Depending on the results of the calibration, you may select Pass , Fail or Incomplete in
the box above the test point grid. If you do not select an option, the System will not allow
you to save the calibration. In addition, if the Adjusted to Improve box is applicable to
your calibration, it is suggested that you check it since this can be used as selection
criteria in advanced queries. By default, this can be used to indicate that the item was
adjusted between the As Found and As Left tests.
DPCTrack2 provides you with the ability to mark an unfinished calibration as
“Incomplete”. The Incomplete circle can only be chosen if neither of the other two result
circles have been selected. Denoting a calibration record as incomplete instructs the
System to ignore the information currently entered on the record so that saving it does not
generate any failure or out of tolerance warnings and none of the dates are rolled forward.
This feature allows you to save your work often without affecting the state of the current
item, or enter calibrations that may take hours or even days to obtain appropriate
readings.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com