Fluke 750SW, Руководство пользователя

Страница: 148 / 226

DPCTrack2
Users Manual
18-16
"Messages"
This read-only tree view box will display messages similar to the following as they apply
to the current calibration record:
"This Calibration has Failed."
"This Calibration has been Found Out of Spec."
This list will contain warnings for out of spec As Found and As Left results, as well as
warnings for Incomplete Calibrations.
"Reason for Failure"
This field may be required for data entry if Require Reason for Failure on Failed Cal
option is turned ON for the current Company record.
"Test Instruments/SOP/User Defined" Tab
The SOP and User-Defined portions of this tab simply contain the default values that may
be filled in for User-Defined Variables and the SOP tab.
The Test Instruments section contains the listing of Test Instruments used for the current
calibration. There may or may not be associated warnings for each listed item. The
warning condition is indicated by the color of the icon for each Test Instrument's ID or
description. The warning action and actual warning message data are found by expanding
the tree (double-clicking or clicking the (+) button).
GREEN : No warnings and this item will be added to the list of Test Instruments used
YELLOW : Warnings possible, but the item will be added to the list of Test Instruments
used
RED : Either the item does not exist or the warnings attached prevent the item from being
added to the list of Test Instruments Used.
For each item you can choose to add a note for the warning or ignore the warning for this
calibration record. This is accomplished by highlighting the Test Instrument you want to
decide on and using the radio buttons that appear to the right of the Test Instrument list.
“Authorize All”
If there are any calibrations left to add, this button will display a dialog that displays all
updates that will occur if any of the displayed uploaded calibrations are passing cals.
Preview Updates Screen - This screen displays the same updates as those that are
checked by default in the Authorize Calibration Screen. This gives the user the
opportunity to cancel the automatic authorization of all the remaining calibrations.
The user can decide to continue the normal pattern of Authorization by clicking “No” at
this dialog, or they can choose to Auto-Authorize all uploaded calibrations by clicking
“Yes.”
18.9 Test Instrument Recognition
You can enter your calibrators and any other test equipment connected to the calibrators
(for example, pressure modules) as Test Instruments.
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com