Fluke 750SW, Руководство пользователя

Страница: 105 / 226

Instrument Record Screen
15.2 Tabbed Notebook Section
15
15-5
15.2.1.12 Approved By, & Approved On
When this box is checked and saved, the fields will be filled in with the user and a date &
time when it was approved. (Please note that if you have not been granted approval
power for Instruments, the Approved by box will be grayed out and inaccessible.)
15.2.1.13 Associated Loops
If the Instrument has been associated with any Loops, then that information will also be
displayed in the Associated Loops box. If this is the case, then those Loop records can be
invoked directly from this screen by double-clicking their listings in the box.
15.2.2 Calibration Points Tab
This page (Figure 15.2) contains fields in which to enter calibration information for the
Instrument, such as # of cal points, stated accuracy, resolution, etc. This information is
then used by the system to calculate the high and low spec and control limits for the
Instrument’s calibration. DPCTrack2 allows you to create test point groups, which may
help you organize this information, especially if the Instrument requires a more
complicated calibration. Not all Instruments will require the use of multiple test point
groups, however an Instrument like a multimeter may require that it’s high and low limits
be calculated from multiple ranges so the use of several different test point groups would
be imperative.
Figure 15.2
Shop for Fluke products online at:
1.877.766.5412
www.
MyFlukeStore
.com