Fluidwell E110-P, Инструкция по эксплуатации

Страница: 23 / 72

E110-P User Manual
FW_E110-P_M_v0301-01_EN Page 23
For E110-P with data logging (with type -ZL)
8 DATALOGGING (WITH TYPE ZL) DEFAULT
8.1 LOG INTERVAL
off - 5 min - 10 min - 15 min - 30 min - 1 hr - 2 hr - 4 hr - 6 hr
- 8 hr off
8.2 DAILY LOG off - single - dual off
8.3 DAILY 1 00:00 - 23:59 (hh:mm) 00:00
8.4 DAILY 2
00:00 - 23:59 (hh:mm) 00:00
8.5 TIME 00:00:00 - 23:59:59 (hh.mm.ss) 00:00:00
8.6 DATE 00.01.01 - 99.12.31 (yy.mm.dd) 00.01.01
9 OTHERS (WITH TYPE ZL) DEFAULT
9.1 MODEL - -
9.2 SOFTWARE VERSION xx.xx.xx -
9.3 SERIAL NUMBER xxxxxxx -
9.4 PASSWORD 0000 - 9999 (0000 = off) 0000
9.5 KEY LOCK enable, disable enable
9.6 TAG NUMBER 0000000 - 9999999 0000000
5.5 SETUP MENU EXPLANATIONS
5.5.1 MENU 1: TOTAL
First set up the flowmeter in
4: FLOWMETER
as this directly affects the settings/measurement units in
the Total menu.
If the measurement unit is changed in
4.2: FLOWMETER > UNITS
, the unit in
1.1: TOTAL > UNIT
will change to
the default setting.
When a different unit is selected, the actual total values are NOT recalculated.
1 TOTAL
1.1 UNIT Determines the measurement unit for total, accumulated total, and the
scaled pulse output.
The available measurement units are controlled by the units selected in
4.2: FLOWMETER > UNITS
:
Auto-vol: L – m3 – US gal – I gal – cf – Oil bbl
Auto-mas: kg – ton – US ton – lb
Hand: l – m3 – US gal – I gal – cf – Oil bbl – kg – ton – US ton – lb - (no
unit)
1.2 DECIMALS Determines for Total and Accumulated Total the number of digits after the
decimal point.
1.3 K-FACTOR This value is used to convert the flowmeter pulse signals into a total unit.
The
K-Factor is based on the number of pulses generated by the flowmeter
per selected measurement unit, as defined in
1.1: TOTAL > UNIT
.
The more accurate the K‑Factor , the more accurate the system.
This setting can only be changed if the automatic unit conversion in
4.2: FLOWMETER > UNITS
is set to Hand. Otherwise, K-factor conversion will be
Auto.
After pressing PROG, the decimal point will start to flash. The decimal
position can then be changed by pressing the SELECT-key, then press the
CLEAR key to set the digits.
1.4 FACTOR-X Determines the multiplication factor of Total and Accumulated Total. It also
applies to the Current and Previous Day Totals.
This makes it possible to display up to 3 more digits of the Total/
accumulated Total. The amount is shown as a rounded number.