17
2.8.3.3.2. Set Time
This function allows setting the real time clock that is integrated in the device.
Due to the back-up battery, the clock will keep running even if the power
supply is shut off.
Day, month, year, hour and minute can be adjusted individually and they are being
transmitted to the real time clock when the menu is being closed.
Select the parameter that has to be changed using the [
] buttons.
The selected parameter is marked with a
*
on the left side of the menu.
By hitting the [
] button, the position that has to be changed can be switched and
set a new parameter with the [
] buttons.
Use [
ESC
] to go back to the previous menu.
2.8.3.3.3. Calibration
As for all the other menus, every calibration value can be selected and changed
individually.
Normally modifications are not necessary!
Since calibration values are of fundamental importance for measurements and should
not be lost, they are saved as EEPROM. Calibration values will even be saved if the
back-up battery is dead. They do not have to be re-entered.
Use the [
] buttons to select the counting channel that is supposed to be changed.
Confirm by hitting the [
] button.
The selected parameter will be marked with a
*
on the left side of the menu.
