flowair ELIS G E-150, Руководство пользователя

Страница: 15 / 36

15
16. ADJUSTMENT OF OUTLET GRILLE
The device is equipped adjustable outlet grilles. The angle should be
set manually /- 17 °. The airflow from the outlet grille should
be directed as close as possible to the plane of the door opening
(taking into account the conditions prevailing at the door opening).
ADVICE
In order to increase the effectiveness of the air barrier during windy
conditions, the curtain ’s air stream should be directed outside the
door to create a more efficient air barrier to external factors.
17. CONNECTION OF HYDRAULIC INSTALLATION
WARNING
1. Disconnect the curtain power supply before connecting the water system.
2. The connection should be made without stress. It is recommended to use flexible ducts supplying the heating
medium.
3. Water supply should be connected to the connector marked with the symbol of red arrow.
4. The installation with the heating medium must be protected against the increase of the heating medium
pressure above the permissible value (1.6 MPa).
5. Before starting the device, check the correct connection of the heating medium and the system for leaks.
6. During assembly of the installation it is absolutely necessary to immobilize the exchanger's connector pipes
(counter)
7. After filling the system with heating medium, check the tightness of the hydraulic connections, including the
built-in vent.
ADVICE
1. It is recommended to use bleeding/air release valves at the highest point of the installation.
2. In the event that the water from the device is drained for a longer period of time, the exchanger tubes should
be blown and dried with compressed air.
3. Installation should be carried out in such a way that in the event of a failure it is possible to dismantle the device
(use of flexible hoses is recommended). For this purpose, use shut-off valves next to the device. (rys. 16.1).
ZK - ball valve
ZO - bleeding valve
ZR - balancing valve
ZD - drainage valve
FS – mesh filter
KP – flexible hoses
SRQ3d – 3-way valve with
ON/OFF actuator
RYS. 16.1. CONNECTION EXAMPLE OF HYDRAULIC COMPONEMTS.