Florite N920 Series, Руководство по обучению на инструменте

Страница: 52 / 55

Control Type - Output View
Function
This screen is used to view the present Control Type.
Navigation
Access this screen by using the CHAN key until reaching the desired output port number, and then by
using the VIEW key until reaching this screen.
Control Types
ƒ
Monitor
o
Analog output Port Type - converts and outputs its linked input port measurement as an
analog signal which has been scaled using the output port interpolation values.
o
Relay output Port Type - energizes the output relay when the linked input port detects
an alarm condition.
ƒ
Manual - linked input measurements are ignored. The value set in the Control Amount is
converted to an analog value using the output port interpolation values, resulting in a
corresponding analog signal appearing at the output port terminals.
ƒ
Batch - causes the quantity set in the Control Amount to be delivered when a batch process is
started.
ƒ
Dose - causes injector activation when the quantity set in the Control Amount reached.
ƒ
PID - causes linked input rate or value measurement to be continuously maintained to be the
value set in the Control Amount.