Florite N920 Series, Руководство по обучению на инструменте

Страница: 3 / 55

D10140—021709
Press the CHAN button until reaching Input Port 1 (note: a 1 will be lo-
cated in the upper right hand corner of the display).
Pulse Output Sensors
Press the PROG button until reaching the Pulse Constant screen followed
by setting the number to correspond to the sensors number of pulses per
quantity. After setting the sensors Meter Constant again press the PROG
button to save the value.
Analog Output Sensors
Press the PROG button until reaching the Low Value screen followed by
setting the numbers for the lowest analog input level. Then press the
PROG button until reaching the Low Units screen and set the numbers for
the lowest measurement units that the Low Value represents.
Press the PROG button until reaching the High Value screen, followed by
setting the numbers for the highest analog input level. Then press the
PROG button until reaching the High Units screen and set the numbers for
the highest measurement units that the High Value represents.
Press the VIEW key to return to the main screen.
To program the units of measure press the PROG button until reaching the
Measure Units screen.
Quick Programming Instructions