Florite N920 Series, Руководство по обучению на инструменте

Страница: 15 / 55

Alarm and Report Phone Numbers - System Program
Function
These screens are used to program the phone numbers to remotely access computers and data
collection equipment to report either one or more alarm conditions, or to send scheduled
measurement information from input ports having their Comm Port appropriately set.
Should an alarm condition occur without the alarm number programmed - the alarm will be sent to the
report phone number to insure alarm information is reported. When scheduled reports are enabled -
alarm information will be sent along with the value report which will be delayed by the programmed
Report Frequency.
Navigation
Access these screens by pressing the CHAN key until reaching the "Sys" port - and then pressing the
PROG key until reaching the desired screen. Note the first character field blinks indicating readiness
for programming.
Select
ƒ
Field - by pressing either the QTY (right) or CHAN (left) key.
ƒ
Character - change by pressing either the ZERO (down) or RATE (up) key.
ƒ
Program - save new value by pressing the PROG key.