Florite N920 Series, Руководство по обучению на инструменте

Страница: 2 / 55

D10140—021709
Connect input or output into in-
strument port as shown
When the analog output option is
installed then plug the cable into
the REM jack and connect the
wires shown to the controlled
equipment.
When the relay output option is
installed then plug the output ca-
ble into the REM jack and con-
nect the wires shown to the con-
trolled equipment.
When you unit is installed with
the WAN modem option then
plug either end of an RJ-11 cable
into the corresponding jack and
the other end of the cable into a
standard telephone jack as
shown.
Plug the D9 part of the RS-232
connector into a computer serial
port. Insert the plug on the other
end of the cable into he PGM
jack as shown
.
Insert power plug into PWR jack
as shown
Installation Instruction