Florite N920 Series, Руководство по обучению на инструменте

Страница: 42 / 55

Rate/Value - Input View
Function
This screen is used to view the present process rate when the port time base is set for seconds,
minutes, hours or days, or scalar value when the time base is set for scalar.
The output port link number and arrow are displayed blinking when the linked output is performing a
control function that requires using the measured rate to perform the control process.
Navigation
Access this screen by using the CHAN key until reaching the desired port number, and then by using
the VIEW key until reaching this screen.
Rate Offset - Tare
Press the ZERO key while viewing this screen to cause the present measured rate to be saved as the
Process Offset. This causes all succeeding rate measurements to be offset by the amount that was
being displayed prior to pressing the ZERO key. Capturing an offset directly affects accumulated
quantities.