Flo Vigaro, Инструкция по эксплуатации

Страница: 19 / 64

19
Operation
5.3 Quick start instructions
To operate the FLO Vigaro immediately:
-
the device should be plugged into the mains power supply,
- the beaker should be in place and filled with water as necessary,
-
the breathing hose should be connected to the mask and device,
-
the pressure gauge hose should be connected to the FLO Vigaro,
-
and the patient should be wearing the mask.
Therapy can now be started by pressing the Start / Stop key. Adjust the
humidifier setting by pressing the appropriate keys.
Press the Start / Stop key again to stop therapy.
5.4 Starting and stopping therapy
If the device is in Standby mode, start therapy by pressing the Start / Stop
key. The turbine will immediately start up, and the display will show the
current actual pressure.
Press the Start / Stop key to stop the device during therapy Start / Stop key .
The turbine will immediately stop, and the display will revert to Standby.
5.5 Ramp
When the device is in standby mode, the ramp function can be Start / Stop key
activated using the Start / Stop key (hold key down for 5 seconds). The display
will show the current actual pressure and the remaining ramp time.
5.6 Humidifier setting
The humidifier setting can be adjusted during therapy by using the two
humidifier keys.
If one of the two keys is pressed during therapy, the display will initially only
show the current setting only. Press either of the two keys again to change the
current setting.