Flo TRACER 1000 3G LTT1-3G, Руководство по эксплуатации

Страница: 5 / 25

(877) 356-5463 | (p) 330-331-7331 | (f) 330-331-7172 | www.FLO-CORP.com | © 2018 FLO-CORP | REVA 0918
5
(877) 356-5463 | (p) 330-331-7331 | (f) 330-331-7172 | www.FLO-CORP.com | © 2018 FLO-CORP | REVA 0918
6
DISPLAYED DIAGNOSTICS
SETUP MENU
While pressing the arrow buttons, the top corner of the display cycles through various unit diagnostics
DISPLAYED DIAGNOSTICS
mA
Simulated current output in mA
NORMAL
Unit operating normally
FAILED Unit in failsafe conditions
RECOVER
Unit searching for level / attempting
to amplify signal
LEVEL-1
Upper Material Level Meausrement
LEVEL-2 Lower Material Level Meausrement
PARAMETER DESCRIPTION OPTIONS
DISPLAY MODE
Select default display mode
Volume
(2)
Level
%Level
Distance
DISPLAY UNIT Adjust displayed measurement unit
Centimeters
Metres
Feet
Inches
LOW LEVEL Set Low Level (4mA) distance Adjustable
HI LEVEL Set High Level (20mA) distance Adjustable
DAMPING Adjust output response time & smoothness Adjustable
TRACKING
Program application Fill and Empty speeds.
Fast (90m/h, 265ft/h.) Medium (30m/h, 98ft/h), Slow (10m/h,
32ft/h).
InstaTrack is a special mode which we respond immediately
to any detected reflection.
‘Test’ Mode adjusts unit function to be suitable for bench
testing and demonstration. The unit will track nearest detected
reflection regardless of size.
• Fast
• Medium
• Slow
• InstaTrack
• Test
DIELECTRIC
Applies a pre-set value to sensitivity based on selected
Dielectric Constant range of material.
• <2 • <2 5
• <10 • <20
• <40 • <80
• > 80