Flo TRACER 1000 3G LTT1-3G, Руководство по эксплуатации

Страница: 4 / 25

(877) 356-5463 | (p) 330-331-7331 | (f) 330-331-7172 | www.FLO-CORP.com | © 2018 FLO-CORP | REVA 0918
3
(877) 356-5463 | (p) 330-331-7331 | (f) 330-331-7172 | www.FLO-CORP.com | © 2018 FLO-CORP | REVA 0918
4
PRIMARY AREAS OF APPLICATION
• Chemical / Petrochemicals
• Energy
• Food & Beverages
• Plastic Pellets
• Minerals & Mining
• Oil & Gas
• Pharmaceutical
• Pulp & Paper
• Wastewater
SPECIFICATION
Specifications are subject to change without notice.
Power
2 wire loop powered
24 VDC (14 to 28 VDC)
Power Consumption <500mW @ 24 Vdc
Analog Output
• 14V @ 0 Ohm
• 19V @ 250 Ohms
• 24V @ 500 Ohms
• Current park at 4mA, 8mA, 12mA
Communications
HART (Revision 5, Universal & Common
Practice commands)
Software via HART. Full parameter list
Maximum Range
Flexible cable probe: 60ft 8in
Rigid probe: 13ft 1in
Minimum Range 5.9 inches
Dielectric Range
≥ 1.5
Frequency 2.2 GHz
Resolution
Analog: 1uA
Display: 1.0mm
Measurements per
second
3
Response Time
<1 second (application dependant)
Sum of non linearity,
non repeatability,
hysteresis
/- 0.02%
Repeatability +/- 3mm
Memory
Non-Volatile (No backup battery required)
>10 years data retention
Operating Temp.
Standard: -40 to 176ºF (-40ºC to +80ºC)
Optional: -40 to 608ºF (-40ºC to 320ºC)
Display
4 line graphic display (128 x 64 pixels)
Language English
Configuration
4 button (up down, Cal, Run), Software
via HART
Approvals
• IECEx Zone 0/1, Zone 1
IECEx TSA 14.0037X
Ex ia/d [ia Ga] IIC T6 Ga/Gb
Tamb = -40°C to +60°C
IP 66, NEMA 4X
(T6 … T1)
• ATEX Grp II Cat 3 GD IP66 Tamb -40°C
to 60°C
• IECEx Zone 20/21
IECEx TSA 14.0037X
Ex ia tb [ia Da] IIIC T85°C Da Db
Tamb = -40°C to +60°C
IP 66, NEMA 4X
• FM Approvals Pending
Electromagnetic
Compatibility
WIRING COMPARTMENT DIMENSIONS
A B