FLIR Ranger HRC MS, Руководство оператора

Страница: 195 / 260

Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
12.2.13 Save settings
The
Save settings
feature saves the current IR Camera settings, for ex-
ample Adjustment mode, Color distribution, Shutter and Adjustment
area. The saved settings will be loaded when the system is switched on
next time.
NOTE : The IR Camera settings are not saved when the PRK button is pressed.
Saving settings
Step Action
1 Select Setup/IR menu to open the IR Camera menu system.
2 Select Setup/Save settings .
3
Select OK and press the ENTER button to confirm.
4 Press the CANCEL button to exit the IR Camera menu system.
12.3 Typical settings for Low/Normal/High
Contrast scenes
The optimal settings of the parameters that are used to control the image
quality depend on many different factors. The thermal contrast in the
scene is a factor that to a large extent has an impact on the choice of set-
tings.
This section provides typical settings for scenes with low, normal and
high thermal contrast.
NOTE : The typical settings shall be used as a starting point for further fine-tuning to
achieve an optimal image quality.
12.3.1 Summary
Typical conditions for low thermal contrast are rainy and foggy weather.
The low contrasts make it difficult for the camera to successfully apply the
automatic features. Hence, manual adjustments are required to achieve
an image of high quality.