FLIR Ranger HRC MS, Руководство оператора

Страница: 176 / 260

Ranger HRC™ operator´s manual – Optimizing the IR Image
Publ. No. TM 614 006 699 Rev B – ENGLISH (EN) – Oct 30. 2008
Selecting Adjustment mode
Step Action
3
Select
Setup
and press the ENTER button.
4 Select Image … and press the ENTER button. The Image Setup dialog box is displayed.
5 Select Adjust mode .
6 Use the LEFT/RIGHT navigation buttons to select Level-Span .
7 Press the ENTER button to confirm.
8
Press the CANCEL button to exit the IR Camera menu system.
Figure 12.6 Top line status indicator.
Top line status indicator 4 indicates the selected adjustment mode
(AUTO).
12.1.7 Color Distribution
There are two Color Distribution modes; Linear and Histogram.

In Linear mode, the colors are distributed linearly from the darkest
to the brightest pixel in the image.

In Histogram mode, the colors are distributed based on the contents
of the image.
The Histogram mode normally gives the best image, but for small details
the Linear mode may be better. The Linear mode also gives a more intui
-
tive perception of the temperature contents.
NOTE : The most suitable color distribution setting depends on many factors. Toggle be­
tween Histogram and Linear to see which mode suits the current situation best.